|
S.No.
|
TITLE & AUTHORS
|
PAGE
|
| 1 | A REVIEW- SUPER CAPACITOR SYSTEMS AND ITS PERFORMANCE
Raji George, Ajay Rijal, Bhargava, Raj Jung Mahat, Santosh Yadav
https://doi.org/10.15623/ijret.2016.0525001 View Paper | 1-8 |
| 2 | DETAILED DESIGN OF A FIBER GLASS BASED MEDIUM SCALE PLUG FLOW REACTOR FOR BIOGASIFICATION OF BIODEGRADABLE FOOD WASTE FOR RURAL AND URBAN INDIA
Jyothilakshmi. R, S. V. Prakash
https://doi.org/10.15623/ijret.2016.0525002 View Paper | 9-15 |
| 3 | LAY–UP OPTIMIZATION OF COMPOSITE LAMINATED PLATE SUBJECTED TO BENDING LOAD INTHE PRESENCE OF DELAMINATION
Venkate Gowda C, Rajanna, N. G. S. Udupa
https://doi.org/10.15623/ijret.2016.0525003 View Paper | 16-20 |
| 4 | EVALUATION OF MECHANICAL PROPERTIES OF HEMP-RAMIE FIBERS REINFORCED WITH EPOXY HYBRID COMPOSITES
Chandrashekar K M, Venkate Gowda C, N G S Uduppa
https://doi.org/10.15623/ijret.2016.0525004 View Paper | 21-26 |
| 5 | STUDY ON TWO-BODY WEAR BEHAVIOR OF GRAPHENE FILLED E-GLASS FABRIC EPOXY COMPOSITES
D J Akshaykumar, VN Vivek Bhandarkar, M R Haseebuddin
https://doi.org/10.15623/ijret.2016.0525005 View Paper | 27-30 |
| 6 | COMPARATIVE STUDY OF CRACK GROWTH DUE TO MECHANICAL AND THERMAL LOADS ON A CURVED SURFACE
Mahantesh. Matur, V. Krishnan, P. Dinesh
https://doi.org/10.15623/ijret.2016.0525006 View Paper | 31-35 |
| 7 | FAULT DETECTION OF CRACKED BEAMS LIKE STRUCTURE USING ARTIFICIAL NEURAL NETWORK (ANN) APPROACH
Rabinarayan Sethi, D.R.K. Parhi, S.K.Senapati
https://doi.org/10.15623/ijret.2016.0525007 View Paper | 36-39 |
| 8 | FREE VIBRATION ANALYSIS OF THIN CYLINDRICAL SHELLS SUBJECTED TO INTERNAL PRESSURE AND FINITE ELEMENT ANALYSIS
J. Kandasamy, M. Madhavi, N. Haritha
https://doi.org/10.15623/ijret.2016.0525008 View Paper | 40-48 |
| 9 | EFFECT OF INJECTION TIMING IN LHR DIESEL ENGINE USING SIMAROUBA BIODIESEL BLENDS AS FUEL
Anjaneya G, Prabhakar Reddy C, Udaya Ravi M, Ravindranath K
https://doi.org/10.15623/ijret.2016.0525009 View Paper | 49-55 |
| 10 | EVALUATION OF FRACTURE TOUGHNESS OF MEDIUM CARBON LOW ALLOY FORGED STEELS
Chandan B R, C M Ramesha, S.K.Rajendra, Sharanraj.V
https://doi.org/10.15623/ijret.2016.0525010 View Paper | 56-63 |
| 11 | PRODUCTION AND CHARACTERISATION OF BIODIESEL FROM SIMAROUBA GLAUCA SEED OIL WITH DIETHYL ETHER AS AN ADDITIVE AND ITS PERFORMANCE AND EMISSION EVALUATION ON SINGLE CYLINDER, FOUR STROKE C.I ENGINE
Danesha D, Manjunath H
https://doi.org/10.15623/ijret.2016.0525011 View Paper | 64-68 |
| 12 | PREDICTION OF ADIABATIC FILM COOLING EFFECTIVENESS OVER FLAT PLATE WITH CYLINDRICAL AND SHAPED FILM HOLES
Dhulesh Mirje, Batchu Suresh, HR Purushothama
https://doi.org/10.15623/ijret.2016.0525012 View Paper | 69-75 |
| 13 | EXPERIMENTAL INVESTIGATION OF INFLUENCE OF PROCESS PARAMETERS ON FRICTIONAL FORCE AND SURFACE ROUGHNESS DURING MACHINING OF AL 6081 MATERIAL
Lokesha, P B Nagaraj, P Dinesh
https://doi.org/10.15623/ijret.2016.0525013 View Paper | 76-80 |
| 14 | CFD ANALYSIS OF BIOFUEL (CNSL BLENDED WITH DIESEL) RUN DIESEL ENGINE
Rajeesh.S, S V Prakash, Dinesh P, Girish V Kulkarni
https://doi.org/10.15623/ijret.2016.0525014 View Paper | 81-88 |
| 15 | DEVELOPMENT AND TRIBOLOGICAL PROPERTIES OF PARTICULATE MMC DEVELOPED BY STIR CASTING PROCESS
Raghavendra N, V S Ramamurthy
https://doi.org/10.15623/ijret.2016.0525015 View Paper | 89-96 |
| 16 | OPTIMAL SYNTHESIS OF EIGHT BAR MECHANISM FOR SPECIFIED PATH GENERATION WITH VARIABLE TOPOLOGY
C. M. Veerendrakumar, Pavan Padara, V. B. Math
https://doi.org/10.15623/ijret.2016.0525016 View Paper | 97-101 |
| 17 | SENSITIVITY ANALYSIS TO ASSESS VIBRATIONAL RESPONSE OF A SANDWICH BEAM USING RESPONSE SURFACE METHODOLOGY
Neena Panandikar, Prajyot D. Kamat, Yogeshwar V.Gaonkar
https://doi.org/10.15623/ijret.2016.0525017 View Paper | 102-104 |
| 18 | STRUCTURAL AND VIBRO-ACOUSTIC ANALYSES OF A SPACE CAPSULE
Rakhesh G. B, B. Balakrishnan, S. Raja, K. Badari Narayana
https://doi.org/10.15623/ijret.2016.0525018 View Paper | 105-108 |
| 19 | CFD ANALYSIS ON INVELOX, A NEW CONCEPT IN WIND POWER
Vinay C D, S S Desai, P S Kulkarni
https://doi.org/10.15623/ijret.2016.0525019 View Paper | 109-114 |
| 20 | FLAME SHAPES AND HEAT TRANSFER CHARACTERISTICS OF AN IMPINGING FLAME JET
Shankar Badiger, T.R. Anil, V.V.Katti
https://doi.org/10.15623/ijret.2016.0525020 View Paper | 115-118 |
| 21 | STUDIES ON THE EFFECT OF TOOL ROTATION IN MICRO-ULTRASONIC DRILLING OF HIGH ASPECT RATIO HOLES
Sandeep Kumar, Akshay Dvivedi
https://doi.org/10.15623/ijret.2016.0525021 View Paper | 119-121 |
| 22 | INVESTIGATIONS ON MODIFICATION OF BINDER SYSTEM IN INVESTMENT CASTING
Khyati Tamta, Umesh Wankhede, D.B.Karunakar
https://doi.org/10.15623/ijret.2016.0525022 View Paper | 122-124 |
| 23 | AN ECDM APPROACH FOR THE DEVELOPMENT OF 3D MICROCHANNELS ON GLASS SUBSTRATES
Tarlochan Singh, Akshay Dvivedi
https://doi.org/10.15623/ijret.2016.0525023 View Paper | 125-127 |
| 24 | EXPERIMENTAL INVESTIGATIONS ON MECHANICAL AND WEAR BEHAVIOR OF HYBRID ALUMINIUM ALLOY
Bharath. T, Rajesh. A. M, Mohammed Kaleemulla, K.Rangasravantha
https://doi.org/10.15623/ijret.2016.0525024 View Paper | 128-131 |
| 25 | TRACKING WORKPIECE STABILITY UNDER VARYING CUTTER POSITIONS, MASS AND COMPLIANCE OF WORKPIECE IN POCKET MILLING
Jamdar S.B, Yadav M. H., Mohite S. S.
https://doi.org/10.15623/ijret.2016.0525025 View Paper | 132-138 |
| 26 | STOCHASTIC ANALYSIS TO ASSESS THE PERFORMANCE OF PELTON WHEEL TEST RIG KEEPING SPEED CONSTANT
Pranav Kulkarni, Vaibhavi Naik, Neena Panandikar
https://doi.org/10.15623/ijret.2016.0525026 View Paper | 139-145 |
| 27 | STOCHASTIC ANALYSIS TO ASSESS THE PERFORMANCE OF PELTON WHEEL TURBINE KEEPING HEAD CONSTANT
Daniel Meneses, SampadaPednekar, AmeyPatil, NeenaPanandikar
https://doi.org/10.15623/ijret.2016.0525027 View Paper | 146-151 |
| 28 | PRODUCTION AND CHARACTERIZATION OF AL6061-GLASS PARTICULATE STIR CAST COMPOSITE
Madhukumar Y C, Umashankar
https://doi.org/10.15623/ijret.2016.0525028 View Paper | 152-155 |
| 29 | KINEMATIC SYNTHESIS OF PLANAR ADJUSTABLE SIX BAR MECHANISM FOR SPECIFIED OUTPUT
C. M. Veerendrakumar, V. B. Math
https://doi.org/10.15623/ijret.2016.0525029 View Paper | 156-161 |
| 30 | SYNTHESIS OF ALUMINA NANOPOWDER USING MIXED FUEL BY SOLUTION COMBUSTION APPROACH
Ch. Naga Siva Krishna, Mangam Venu
https://doi.org/10.15623/ijret.2016.0525030 View Paper | 162-164 |
| 31 | OPTIMIZATION OF PARAMETERS AFFECTING SURFACE ROUGHNESS AND HOLE DIAMETER IN BORING PROCESS
Chiranjeevi Chennu, V Sai Nitish, Amit Shiva Kumar, K Badari Narayana, Jagadish Moghaveera
https://doi.org/10.15623/ijret.2016.0525031 View Paper | 165-168 |
| 32 | INFLUENCE OF AL2O3NANO FILLER ADDITIONS ON THREE BODY ABRASIVE WEAR BEHAVIOR OF CARBON FIBER/EPOXYCOMPOSITES
Haseebuddin M R, Bhaskar Pal, Akshaykumar D J
https://doi.org/10.15623/ijret.2016.0525032 View Paper | 169-172 |
| 33 | FABRICATION OF BASIC SCREW EXTRUDER TO MANUFACTURE 3D PRINTERS’ FILAMENT
Arvind V. Lal, Monish U.R., Ahlaad Saraf, Jaya Christiyan K.G.
https://doi.org/10.15623/ijret.2016.0525033 View Paper | 173-180 |
| 34 | DEVELOPMENT OF A PROTOTYPE OF A SOLAR POWERED PLOUGHING ROBOT
Ajit Salunke, Swapnil Ramani, Dhirendra Singh, Akash Yadav, Santosh Mishra
https://doi.org/10.15623/ijret.2016.0525034 View Paper | 181-185 |
| 35 | CONVEX LENS WITH TRANSPARENT GLASS SOLAR WATER HEATING SYSTEM
Naveen Kumar B.K., Sushma M.S., Raveesha. S.
https://doi.org/10.15623/ijret.2016.0525035 View Paper | 186-189 |
| 36 | STUDY THE RESPONSE SURFACE OF ABS COMPOSITE OF PROCESS PARAMETERS FABRICATED USING 3D PRINTING TECHNIQUE
K.G. Jaya Christiyan, U. Chandrasekhar, K. Venkateswarlu
https://doi.org/10.15623/ijret.2016.0525036 View Paper | 190-196 |