ARSENIC REMOVAL FROM DRINKING WATER USING FLYASH AS AN ADSORBENT

C R Ramakrishnaiah, Deepika B Naikar

Abstract: Nowadays water pollution has become a major problem that is being faced by the human kind. Among various pollutants present in water, arsenic is gaining much importance because of the toxicity of its compounds. Hence it is very much necessary to find the best suitable technique for removal of arsenic from drinking water. In the present study, the removal of Arsenic from synthetic sample on coated fly ash has been carried out at room temperature 32 ± 1oC. Initially raw fly ash was used for the experiment and it was seen that the residual arsenic concentration increased hencebatch tests were conducted for the removal of Arsenic on iron sulphate coated fly ash for optimum parameters such as dosage, pH, time, initial concentration and agitation rate. The maximum removal efficiency was obtained at an optimum dosage of 0.5gms. It was found that 100% removal can be achieved at slightly alkaline pH condition. The optimum time, initial concentration and agitation rate were found to be 15mins, 140µg/l and 150RPM respectively.

Keywords: Arsenic, Adsorption, Iron Sulphate coated Fly Ash.

DOI: https://doi.org/10.15623/ijret.2016.0523001