OPTIMIZATION OFSPIRAL INDUCTOR WITH DIFFERENT INNER DIAMETERS

Beeresha R S, A M Khan, Manjunath Reddy H V

Abstract: A scalable and highly accurate RF/Microwave symmetricalinductor has been designed using microstrip line. The 18 circular and 18 square structures are optimized with 600MHz operating frequency. The characteristic interest on high frequency operating circuits is inductance value and quality factor of the spiral inductor. The value of the spiral inductor is depends on conductor width (W) space between the conductor (S), turns (n) outer diameter and inner diameter of the spiral inductor. In this design change the distribution of an inner diameter from 5mil to 10milfor 3 to 5 turns of spiral inductors. The optimization of inner diameter distribution is done by keeping space (1mil)between the conductor and width (2mil) of the conductor as constant. The changing inner diameter will effect to change in magnitude of the inductance and quality factor due passive capacitive and inductive reactance effect. These spiral inductors are designed using aluminum (Al) substrate material with 15mil height from the ground plane. The cupper material is used as a conductor of thickness 0.302mm. The aim of this paper is to compare the electromagnetic simulated results with simple equations of modified wheeler (MW), current sheet Approximation (CSA) and monomial equation (ME). The passive component effect the spiral inductor is examines the variation of inductance and quality factor. The observed electromagnetic field simulated results gives better agreement with standard simple mentioned equations with 600MHz operating frequency. The validation of spiral inductor is done with different inner diameter (5mil to 10mil) and number of turns (3turns to 5 turns) of the spiral inductor.

Keywords: Quality Factor, Microstrip, Spiral Inductor, Radio Frequency, S-parameter, SRF.

DOI: https://doi.org/10.15623/ijret.2016.0516053