EFFECT ON COMPRESSIVE STRENGTH OF CONCRETE USING SEA SAND AS A PARTIAL REPLACEMENT FOR FINE AGGREGATE

W. Sai Deepak, G. Tirupathi Naidu

Abstract: Concrete is a major construction material used in the construction now a days. It is a composite material containing cement, fine aggregate, coarse aggregate and water. Fine aggregate is required in large quantities for manufacturing of concrete. Generally river sand is used as a fine aggregate. Due to increase in the utilization of concrete in construction sector, the need for river sand has been increased enormously. Limitations have been laid on the large scale mining of river sand from river beds. In this context there are cases of illegal mixing of sea sand with river sand. This paper mainly presents the practical study of the compressive strength of the concrete in which sea sand was used as fine aggregate is partially or completely replaced. For this study first control specimens were laid for M20 grade concrete. The fine aggregate proportion from the design mix was replaced partially in percentages of 20%, 40%, 60%, 80% and 100% by sea sand. Compressive strength test was conducted on the various concrete specimens with various fine aggregate proportions and the results were tabulated. The compressive strengths of concrete specimens for respective mix proportions were tested at 7, 14 and 28 days of water curing. The behavior of concrete by partial replacement of fine aggregate with sea sand has been studied. With the increase in the percentage of sea sand replacement in concrete, the compressive strength of the concrete significantly reduced.

Keywords: Concrete, Fine Aggregate, sea sand, Compressive strength

DOI: https://doi.org/10.15623/ijret.2015.0406030