ANALYSIS OF RC FRAMED STRUCTURES WITH CENTRAL AND PARTIAL OPENINGS IN MASONRY INFILL WALL USING DIAGONAL STRUT METHOD

Chidananda HR, Raghu K, G Narayana

Abstract: In Reinforced concrete frames the masonry infill walls are a common practice in countries like India, where the region is prone to seismic activity. In general, the masonry infill walls are treated as nonstructural element in structural analysis and only the contribution of its mass for is considered and it’s structural parameters like strength and stiffness is generally ignored in practice, such an approach may lead to an unsafe design. Infill walls resist lateral loads but because of the openings in the infill wall the resistance may slightly reduce. The IS code provisions do not provide guidelines for the analysis and design of RC frames with infill wall and for different percentage of openings. In this study, an office or residential building outer side central opening or outer side partial openings are used and analysis is carried for Bare Frame model, infill walls without opening, infill walls with outer periphery central opening and infill wall with outer periphery partial opening models. In ETABS software G+14 RC framed building models has been prepared, Equivalent Static Lateral force method, Response spectrum method has been performed for analysis as per IS 1893 : 2002 including p-delta effects. Storey displacement, Storey shear, Storey drift, with soft storey considering the effects of infill wall with central and partial openings are the parameters considered in this study. For modeling, the Equivalent diagonal strut method has been used to find out the width of Strut using FEMA 273 .The results for bare frame, infill wall, and infill wall with central and partial openings are discussed and conclusions are made

Keywords: Equivalent diagonal strut, stiffness, Drift limitation.

DOI: https://doi.org/10.15623/ijret.2015.0404110