COMPARATIVE STUDY OF BEHAVIOUR OF COLD-FORMED STEELAND HOT ROLLED STEEL SECTION UNDER COMPRESSIVE LOADING

Salokhe S. A, Patil P. S

Abstract: Cold-formed steel is used in large number of products. For example in metal building construction, for wall coverings, floor decking etc. Cold-formed steel is a basic component in construction of lightweight prefabricated structures like stud frame panels, trusses and portal frames.The Cold formed steel term itself make it different from hot rolled steel due to difference in manufacturing methods. Typically columns, beams and angles etc. are different globally. At room temperature cold formed steel members are formed by bending flat sheets. Cold formed steel sections mainly created using two methods those are break press through and rolling. Where hot rolled steel members are precasted. Therefore cold formed steel sections can be easily available at any place where hot rolled sections are not available. The cold formed steel components can be used for larger and complex structures. The Comparison of cold formed steel section and Hot rolled steel section of equal cross sectional area is done in this research paper. Sections were experimentally tested under axial compression in universal testing machine. Simultaneously, ultimate compressive strength of cold formed members and hot rolled members has been investigated. Also, different properties of the sections such as stresses induced in the sections, strain in the section, axial deflection, and lateral deflection are obtained experimentally. For measuring strain experimentally strain gage foils were used. The validation of results is done by preparing finite element model in ABAQUS software. From experimental work it is observed that cold formed steel sections has more load carrying capacity as compared to hot rolled steel section

Keywords: Ultimate compressive strength, buckling, cold formed steel, deflection, stress, strain, ABAQUS

DOI: https://doi.org/10.15623/ijret.2015.0404090