EFFECT OF MILL SCALE AND FLY ASH WASTE ON THE PERFORMANCE OF CEMENT MORTAR

Shivam Nema, Pranjali Soley, Ansh Bhawsar, Ashish Nim

Abstract: This paper investigates effect of mill scale and fly ash wastes as a replacement of fine aggregate generally natural sand on the performance of cement mortar. Utilization of fly ash and mill scale in cement mortar production not only provides significant environmental benefits but also enhances performance of the cement mortar when used at optimum amounts. They may be used in the form of finely ground additive to replace part of aggregates in cement mortar. This study looked at the feasibility of mill scale and fly ash waste inclusion as partial aggregate replacement in normal cement mortar. Properties of cement mortar incorporating fly ash and mill scale waste as partial substitution for natural aggregate were investigated. The study involves six replacement levels of mill scale and fly ash wastes into cement mortar for each mix design. Mortar cubes are tested for strength, & water absorption. The partial replacement of fine aggregate by M(3,30), M(5,30), M(8,30), M(10,30), M(12,30), M(15,30) ( M-mix of mill scale & fly ash %) improves the properties of normal mortar. In the design mix of industrial wastes produced, percentage of fly ash is kept constant (30 %) and mill scale is varied from 0 to 15 % by weight of natural sand. The test results indicate that the mechanical properties of mill scale and fly ash modified mortar are improved to a great extent, whereas the water absorption is reduced as compared to that of plain mortar.

Keywords: Mill Scale, Fly Ash, Compressive Strength, Durability, Water Absorption, Density

DOI: https://doi.org/10.15623/ijret.2015.0402048