EFFECT OF CHROMIUM POWDER MIXED DIELECTRIC ON PERFORMANCE CHARACTERISTIC OF AISI D2 DIE STEEL USING EDM

Abhishek Abrol, Sunil Sharma

Abstract: In this paper, the effect of chromium powder mixed dielectric fluid on machining characteristics of AISI D2 die steel has been studied. Peak current, pulse on time, pulse off time, concentration of powder are the process parameters. The process performance is measured in terms of material removal rate (MRR), tool wear rate (TWR) and surface roughness (SR). The research outcome will identify the important process parameters that maximize MRR, minimize TWR and SR. The design of experiment has been undertaken using Taguchi method. ANOVA analysis has been used to investigate the percentage contribution of each process parameter for optimizing the performance. The study indicates that all the selected parameters except pulse off time have a significant effect on MRR. Current is found to be the most significant factor for MRR and TWR. With increase in current, TWR increases. Also, surface roughness increases with increase in pulse off time

Keywords: PMEDM, Material removal rate, Tool wear rate, Surface roughness, Taguchi method

DOI: https://doi.org/10.15623/ijret.2015.0401036