STUDY OF STRENGTH PROPERTIES OF CONCRETE BY USING MICRO SILICA AND NANO SILICA

S. Tanveer Hussain, K.V.S. Gopala Krishna Sastry

Abstract: Concrete is the most versatile material due to the persistent and continuous demands made on concrete, Engineers are continually pushing the limits to improve its performance with the help of innovative chemical admixtures and supplementary cementitious materials like fly ash, silica fume, granulated blast furnace slag and steel slag etc… The use of large quantity of cement produces increasing co2 emissions and consequence the green house effect. A method to reduce the cement content in concrete mixes is the use of silica fume which is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultra fine powder collected as a byproduct of the silicon and ferrosilicon alloy production with an average particle diameter of 0.1 to 0.5 µ. The past investigations reveled that silica fume was an excellent pozzolanic material in producing High performance concrete (HPC). Nano technology is one of the most promising areas of science. The use of nano materials in concrete is new revolution. Nano materials like nano silica, nano titanium oxide, carbon nano tubes, nano alumina etc… which are presently used in concrete to modify its strength properties. In the present study strength properties such as Compressive strength, split tensile strength and flexural strength of M40 and M50 grades of concrete with the use of micro silica (5%, 7.5%, 10%, 15%) and nano silica (1%, 1.5%, 2%, 2.5%) as partial replacement of cement were studied. It was found from the experimental study that concrete composites with superior properties can be produced using micro silica, nano silica and combination of micro silica and nano silica

Keywords: Colloidal Nano Silica (NS), Silica Fume (SF), Compressive strength (CS), Split tensile strength (ST) and Flexural strength (FS).

DOI: https://doi.org/10.15623/ijret.2014.0310016