EFFECT OF THE USE OF CRUMB RUBBER IN CONVENTIONAL BITUMEN ON THE MARSHALL STABILITY VALUE

Harpalsinh Raol, Abhijitsinh Parmar, Dhaval Patel, Jitendra Jayswal

Abstract: In today’s era, solid waste management is the thrust area. Out of this various waste materials, plastic waste, tyre waste and municipal solid waste are of great concern. On the other side, the road traffic is increasing. The traffic intensity isalso increasing. The load bearing capacities of the road are to be increased. Our present work is helping to take care of both these aspects.Plastic waste, consisting of carry bags, cups, thermocoles, etc. can be used as a coating over aggregate and this coated stone can be used for road construction. Secondly the waste tires are powdered and the powder is blended with bitumen and this blend is used along with plastic coated aggregate. The mix polymer coated aggregate and tyre modified bitumen have shown higher strength. Use of this mix for road construction helps to use both plastics waste and tyre waste.Stone aggregate is coated with the molten waste plastics. The coating of plastics reduces the porosity, absorption of moisture and improves soundness.The polymer coated aggregate bitumen mix forms better material for flexible pavement construction as the mix shows higher Marshall Stability value and suitable Marshall Coefficient. Moreover the polymer coated aggregate helps to use Crumb rubber modified bitumen resulting in better result. Moreover the polymer coated aggregate helps to use Crumb rubber modified bitumen resulting in better result.Crumb Rubber Modified Bitumen (CRMB) is hydrocarbon binder obtained through physical and chemical interaction of crumb rubber (produced by recycling of used tires) with bitumen and some specific additives. The Flextal range of CRMB offers binders which are stable and easy to handle with enhanced performances.( www.total.co.in)[1]

Keywords: CRMB, Pavement, Bitumen, Crumb Rubber, and Marshall Stability Value

DOI: https://doi.org/10.15623/ijret.2014.0301034