EFFECT OF VARIATION OF PLASTIC HINGE LENGTH ON THE RESULTS OF NON-LINEAR ANALYSIS

Neena Panandikar Hede, K.S.Babunarayan

Abstract: The nonlinear Static procedure also well known as pushover analysis is method where in monotonically increasing loads are applied to the structure till the structure is unable to resist any further load. It is a popular tool for seismic performance evaluation of existing and new structures. In literature lot of research has been carried out on conventional pushover analysis and after knowing deficiency efforts have been made to improve it. But actual test results to verify the analytically obtained pushover results are rarely available. It has been found that some amount of variation is always expected to exist in seismic demand prediction of pushover analysis. Initial study is carried out by considering user defined hinge properties and default hinge length. Attempt is being made to assess the variation of pushover analysis results by considering user defined hinge properties and various hinge length formulations available in literature and results compared with experimentally obtained results based on test carried out on a G+2 storied RCC framed structure. For the present study two geometric models viz bare frame and rigid frame model is considered and it is found that the results of pushover analysis are very sensitive to geometric model and hinge length adopted

Keywords: Pushover analysis, Base shear, Displacement, hinge length, moment curvature analysis

DOI: https://doi.org/10.15623/ijret.2013.0213083