A STUDY OF R.C.C. BEAM-COLUMN CONNECTION SUBJECTED TO MONOTONIC LOADING

S.S.Patil, S.S.Manekari

Abstract: Beam and column where intersects is called as joint or Connection. The different types of joints are classified as corner joint, exterior joint, interior joint etc. on beam column joint applying quasi-static loading .i. e. monotonic loading on cantilever end of the beam and study of various parameters as to be find out on corner and exterior beam column joint i.e. maximum stress, minimum stress, displacement and variation in stiffness of beam column joint can be analyzed in Ansys software ( Non-Linear FEM Software) The various research studies focused on corner and exterior beam column joints and their behavior, support conditions of beam-column joints. Some recent experimental studies, however, addressed beam-column joints of substandard RC frames with weak columns, poor anchorage of longitudinal beam bars and insufficient transverse reinforcement. the behavior of exterior beam column joint is different than the corner beam column joint.

Keywords: beam, column, corner, exterior, joint, monotonic load, quasi-static, varying stiffness

DOI: https://doi.org/10.15623/ijret.2013.0213022